Choose Your OhMiBod
INTERACTIVE DEVICE:

Select a device for information about connection and content.



CAM performers: Click here for information regarding Google Chrome plug-in for many caming platforms!
Our Interactive products' LED features provide visual feedback of vibration for viewers!

Esca 2ESCA 2:

Esca has 2 modes. To cycle through each setting, click the single multi-functional button until you reach the mode of your choice.


Bluetooth® Mode:

Bluetooth® Mode is the initial mode when you power on your Esca, as well as the next two modes you can cycle through. You can control your Esca through the OhMiBod Remote App, or use the FeelConnect App to control your Esca with another Kiiroo device!



Connecting with FeelConnect:

To start, download the FeelConnect App:


App Store   Google Play


Follow the instructions on the FeelConnect App to pair to your device(s), or Click Here to be guided through your set up and connection, as well as how to connect with a partner's device within Bluetooth® range.

To connect remotely to a partner's device:

  1. Download, install, and follow the set up instructions in the Feel-Connect App.
  2. Scan the following QR code:
    QR Code
  3. Click on Feel Share in the app and share the code (via email, messaging app, etc.) with your partner
  4. Have fun!



How Bright You Shine Is Up To You!

Esca Bluetooth® Mode has three settings, where you can vary your Esca's power and brightness:


Full LED

Initial Mode:
100% power and
100% light

Half LED

1 click:
50% power and
50% light

Initial LED

2 clicks:
100% power and
light at base level




Manual Mode:

Press the multifunctional button an additional time to cycle into manual mode.

Once the device is in Manual Mode you can click through the four (4) preset modes by pressing the button:


Pattern 1: Steady vibrations
------------------------------------------

Pattern 2: Slow, rising and falling wave of vibration
Wave

Pattern 3: Simple short vibrations
____----____----____----____----____----____----

Pattern 4: Very rapid pulsing vibrations
__--__--__--__--__--__--__--__--__--__--__--__--



Fuse FUSE:


Fuse has 3 modes:

Bluetooth® Mode - connect your Fuse to other devices, or to interactive content

Touch-Sensitive Mode - control your Fuse via touch

Manual Mode - experience pre-set patterns and pulsations


To cycle through each mode, click the single multi-functional button.


Bluetooth® Mode:

Bluetooth® Mode is the initial mode when you power on your Fuse.

It is indicated by the LED shining blue.

In Bluetooth® Mode, you can connect to your phone, tablet, or smartwatch, and control your device through the FeelConnect App or the OhMiBod Remote App.

Connecting to Another Device:

To start, download the FeelConnect App:


App Store   Google Play


Follow the instructions on the FeelConnect App to pair to your device(s), or Click Here to be guided through your set up and connection, as well as how to connect with a partner's device within Bluetooth® range.

To connect remotely to a partner's device:

  1. Download, install, and follow the set up instructions in the Feel-Connect App.
  2. Scan the following QR code:
    QR Code
  3. Click on Feel Share in the app and share the code (via email, messaging app, etc.) with your partner
  4. Have fun!

HOW TO INTERACT WITH Fleshlight Launch

Unleash Fuse's superpowers! Ignite a connection and take off with the incredible pairing of Fuse and Fleshlight® Launch

Stroke the tickler up

Stroke the tickler downward to make the Launch go slower.

Stroke the tickler down

Stroke the tickler upward to make the Launch go faster.

Double tap the tickler

Double tap the tickler to change the Launch's stroke length.

Fleshlight Launch and Fuse

Connecting to Interactive Content:

Like other Kiiroo devices on the cutting edge of pleasure technology, Fuse can interact with 2D visual content, or adult virtual reality content for added dimensions of enjoyment.



videos

To connect to 2D visual content:

  1. Download, install, and follow the setup instructions in the Feel-Connect App.
  2. Connect to the App - Be sure you have Bluetooth® enabled.
  3. Go to FeelMe.com to register your device
  4. On FeelMe.com, please select the drop down menu and click on "My Devices"
  5. After selecting your device, please go back to the FeelConnect app on your phone, and select "Add a website"
  6. Scan the QR Code on the website to connect
  7. Now you can select content to watch!

 

videos

To connect to VR content:

  1. Download and install the FEELVR app (on Google Play and the App Store)
  2. After downloading the FEELVR app, please connect your device to FeelVR app by connecting a device
  3. Go to FeelMe.com on your phone and log in with your details
  4. After you have logged in, please select the VR content that you would like to interact with.
  5. Select either "Stream VR" or "Download VR" after you have purchased your video (if you have a monthly subscription, then just select either Stream VR or Download VR)

* Please note that Bluetooth® Mode is the only mode where you can send & receive signals to and from partners or content.



Touch-Sensitive Mode:

Touch sensitive mode is activated by pressing the multifunctional button once after powering on the device. It is indicated by the LED turning white.

Fuse responds intuitively to touch; its surface will vibrate whenever it comes into contact with your body. Move the surface of the device over your body to enjoy precise sensations delivered exactly where contact is made. Move Fuse inside to activate more widespread vibrations.


Touch Sensitive Mode



Manual Mode:

Press the multifunctional button an additional time to cycle into manual mode. This mode is indicated by a white LED that blinks in time with the device's pulsations.

Once the device is in Manual Mode you can click through the seven (7) preset modes by pressing the button:


Pattern 1: Steady vibrations
------------------------------------------

Pattern 2: Simple, slow vibrations
______------______------______------______-----

Pattern 3: Simple short vibrations
___---___---___---___---___---___---___---___---___---

Pattern 4: 8 short vibrations, 1 long vibration
___---___---___---___---___---___---___---___---___--------------------------

Pattern 5: 4 medium vibrations, 6 short vibrations
____----____----____----____----____--__--__--__--__--__--__--

Pattern 6: 7 short vibrations with medium pause, 7 medium vibrations with short pause, 1 long vibration
___--___--___--___--___--___--___--__----__----__----__----__----__----__----__----------------------------

Pattern 7: 7 medium vibrations with medium pause, 1 long vibration, 7 short vibrations with short pause, 1 long vibration
___---___---___---___---___---___---___---___------------------------_-_-_-_-_-_-_-_------------------------





Disclaimer:

OhMiBod Interactive Devices are to be used with authorized apps only. These apps are: FeelConnect, FeelPerformer, FeelVR, and OhMiBod Remote. Please be advised that this list may be updated in the future. Click here for the most up-to-date list of kiiroo compatible apps, and here for information on the OhMiBod Remote app.

Downloading any third party applications to control or interact with your OhMiBod Interactive device that are not mentioned above is done entirely at your own risk. In the event that a third party application is downloaded and it damages either the device software or hardware or leads to personal injury, neither Kiiroo, OhMiBod, nor any of their partners will be held liable. In the event that third party applications are downloaded, the device warranty will be void.